Irrigation Fittings & Aquatrays

Aquatrays are robust, injection molded channels designed to accommodate rockwool slabs of both 1m and 1.2m in length. Available in two lengths; 1m (incorporating two drainage holes and two corresponding 90 degree fittings) and 1.3m (incorporating one central drainage hole and a ridged base for optimal drainage). These trays can be invaluable to the DIY growers looking to fit a passive hydroponic s...

Handy little meter (tensiometer) that let's you measure the overall saturation level of soil and coco. It works by measuring the "pull" on the ceramic cone part on the bottom of the meter, this is roughly the same type of system plant roots use so it provides a good indication of what's actually happening down below in the growing medium. There is a small digital display on top of the meter, this ...

Barbed Tee peice for for low pressure and outdoor irrigation systems. Available in 12mm and 16mm sizes....

90 Degree barbed elbow for low pressure and outdoor irrigation systems. Available in 12mm and 16mm sizes....

For connecting two pieces of the same size pipe together. Available in 12mm and 16mm diameters....

Can be added at the end of pipe runs to stop any leaks....

Reduces down from 16mm to 2 x 4mm - this very useful fitting is pefect for drip systems and autopots....

Great for making drip rings from 4mm dripper line....

16mm barbed cross for extending irrigation tubing....

Very high quality in-line tap for adjusting flow rates and isolating individual dripper lines....

Takes 16mm pipe into 8 x 4mm outlets....

Drippers availalable in three different versions:- The Flood Dripper is an unrestricted dripper for use in system where the flow of water has been through some kind of pressure regulator, or in smaller systems where equal pressure is likely anyway. The Arrow Dripper is a 2 litre per hour regulated dripper for use with Wilma systems The Octa-Mitter is an adjustable flow dripper....

Used in-line, this product does not allow water to flow back towards the pump after it has stopped pumping....

Allows you to cut a whole through any surface and join pipework to the other side. Comes with rubber grommet to prevent leaks....

Blue 6mm Barbed Double Inlet to help spread the nutrient solution evenly at the head of an NFT tray....

Barbed 16mm inline filter for use in low pressure irrigation systems. The filter should be placed at the beginning of the irrigation lines, straight after the tank, to prevent large particles travelling through the lines and blocking drippers or dripper line. The filter screen itself is removable for cleaning....

High quality sprinklers with a variety of uses - they fit on to both LDPE Dripper Line and 4mm Flexi tube offering a constant 360 degree oxygen rich spray that's perfect for encouraging rapid root growth. Great little sprinkler!!!...