Aluminium Ducting is a simple way to connect fans and filters to provide ventilation for your grow room.
Lightweight and flexible, it features a wire helix to permit maximum airflow, though we recommend keeping bends to a minimum for increased efficiency - 90° bends are much better suited for this. If noise is an issue we recommend using acoustic ducting instead.
Available in 5m lengths and in a range of diameters from 100mm/4" to 315mm/12", it can be easily attached using jubilee clips, cable ties and/or heat-resistant tape.
Standard uninsulated aluminium ducting is a simple, cost-effective way to connect your fans and filters to provide ventilation for your grow room or tent.
This lightweight, flexible duct is available in a range of diameters from 100mm/4 to 315mm/12 and comes boxed in five-metre lengths.
The ducting features a wire helix to hold it open and permit maximum airflow, although we would always recommend keeping bends to a minimum or the extraction will be reduced. If you need to add several angles to your ducting then it could be worth looking at the 90-degree bends.
All ducting can be attached using jubilee clips or tape.